Light linear LED lighting IP65 12W and 24W versions suitable for floodlighting and accentual lighting.
These luminaires have a through wiring and can be connected in-line using IP68 connectors (luminaire with two cable pins version, 2P). That allows to don’t use junction boxes on each device. Quantity of lamps in-line depends on the cross section of the supply cable and is to be calculated at the maximum load.
The luminaire has small wind and snow loads due to the small size and weight, and is a good solution for facade lighting, incl. on the facade historic buildings.
Stainless steel bracket with additional screws to fix the inclination angle of the luminaire is included.
BAND 20W CW 500mm 24V IP65
|System power, W||
|Input voltage, V||
|Light flow, LM||
|Color temp., K||
Architectural LED lighting
Housing: Pressure-molded aluminum housing is coated with polyester powder coating. Body and glass are fitted with silicone gaskets.
Fasteners: Stainless steel, 2.0 mm.
Glass: Tempered glass. 3.0mm.
Optical system: CRI ≥ 85%.
Optical device angle options: 20° and 35°. CREE LEDs.
Housing color: Silver, graphite (RAL 7037).
Cable pin: Sealed cable outlet IP68, PG-11 copper.
Cable connection: Cable connection (standard) or the IP68 plug (“male-female” type; special execution).
Operating temperature: -20°C to +40°C (up to -40°C at the client’s request).
Connection methods: catalogue pages 6-9.