Linear LED IP66 luminaire 26W and 35W power range.
These luminaires are designed for floodlighting and accentual lighting in architectural projects. There is available versions with warm white light, neutral and cold shades as well as RGB with the DMX-512 protocol-based control option. The power supply and the driver are placed inside the housing for easily installation.
BAND WASH 400 26W 2800K 400mm 220V IP66
|System power, W||
|Input voltage, V||
|Light flow, LM||
|Color temp., K||
Architectural LED lighting
Housing: Extruded aluminum housing with length 400mm is coated with polyester powder coating. Body and glass are fitted with silicone gaskets.
Fasteners: Aluminum, on the bottom or side of the luminaire.
Glass: Tempered glass, 3.0 mm.
Optical system: CRI ≥ 85%.
Optical beam angles : 16°.
Housing color: Silver.
Cable pin: Sealed cable enter IP68, PG-11 copper.
Cable connection: Cable connection (standard) or the IP68 plug (“male-female” type; special edition).
Operating temperature: -40°C to +45°C (at startup: -20°C to +45°C).
Dimming: 0% to 100%, under the DMX-512 protocol.
Network / mains connection: Airtight cable outlet, IP68, 3 m long cable is included, the outlet is located at the luminaire’s butt-end.
Control signal transmission: Airtight cable inlet and outlet, IP68, 3 m long cable is included, the outlet is located at the luminaire’s butt-end.