LED IP66 luminaire 76W for floodlighting and accentual lighting.
Designed for use in floodlighting and accentual lighting instead of high-power gas-discharge lamps. Using of highly efficient LEDs together with various optical devices dynamic controlled beam angles from 5° to 45° and the DMX-512 device control protocol – all these features allow for outstanding results to be achieved in outdoor lighting projects. There is available versions with warm white light, neutral and cold shades as well as RGB with the DMX-512 protocol-based control option.
The fasteners allow rotating the projector at any angle, relatively to the bracket.
The glass is leveled with the housing for escaping water accumulation and water lens formations.
JUGGER 75W RGB DMX-512 220V IP66
|System power, W||
|Input voltage, V||
|Light flow, LM||
|Color temp., K||
Architectural LED lighting
Housing: Pressure-molded aluminum housing is coated with polyester powder coating. Body and glass are fitted with silicone gaskets.
Fasteners: Stainless steel, 2.0 mm.
Glass: Tempered glass, 3.0 mm.
Optical system: Optical lens. Efficiency ≥ 85%
Optical beam angles: 5°, 12°, 25°, 45°.
Housing color: White, black.
Cable pin: Sealed cable enter IP68, PG-11 copper.
Cable connection: Cable connection (standard) or the IP68 plug (“male-female” type)
Operating temperature: -40°C to +45°C (at startup: -20°C to +45°C).
Dimming: 0% to 100%, under the DMX-512 protocol.
Managed sections: 2.
Number of diodes (single-colored): 40 pcs.
Number of diodes: (RGB): 40 pcs. (14R+14G+12B).
Network / mains connection: Sealed cable outlet, IP68, 3 m long cable is included.
Control signal transmission: Sealed cable inlet and outlet, IP68, 3 m long cable is included.